DR VAKU® Swadesi Pulse Oximeter
INTRODUCTION
 |
| Image Source - Google / Image by amazon |
Get your blood-oxygen levels in seconds!. This oximeter can measure and monitor heart rate, SPO2 and pulse intensity with high accuracy. Graphs on waveforms (plasmismographs) and digital readings as well as pulse bars to visualize any irregularities or abnormalities such as a weak heartbeat.
BENEFITS
 |
| Image Source - Google / Image by amazon |
1. Doctor's choice: accelerated rate and spread 2 Arterial hemoglobin levels measure oxygen saturation quickly and accurately. Set your Spo2 (blood oxygen saturation level), fast Spoo 2 readings, pulse measurements, and easily on a large digital bright LED display.
2. Oxygen Monitor Boat's own large digital LED display can clearly read the results, reading in many directions.
3. Accurate: Rotatable multi-directional display, allowing you to see your results in any direction at pulse wave, pulse rate, bar graph, spot 2 level and battery level.
4. Blood oxygen can be measured by pressing a button in seconds.
Note: * 2 AAA batteries are required which are included in the package. The oximeter automatically turns off after 10 seconds of inactivity and can be operated continuously for more than 20 hours.
Save Extra with 4 offers
 |
| Image Source - Google / Image by amazon |
1. Bank Offer: 10% Instant Discount up to Rs. 1500 on minimum order of Rs. 5,000 with SBI Credit cards and Credit Card EMIs Here's how
2. No Cost EMI: Avail No Cost EMI on select cards for orders above ₹3000 Here's how
3. Cashback: Get daily rewards up to ₹100 on shopping with Amazon Pay UPI.Check your eligibility here Here's how
4. Partner Offers (4): Buy now & pay next month at 0% interest or pay in EMIs with Amazon Pay Later. Instant credit upto ₹20,000.
FEATURES
 |
| Image Source - Google / Image by amazon |
1. Accurate and Reliable
The perfusion index and plathismograph waveform will help you determine the reliability of your reading.
2. Bright OLED Display
Bright OLED displays allow use in any environment - from dark surroundings to bright sunlight.
3. Portable and lightweight
The small size of the oximeter makes it easy for you to move around in your daily life.
4. Quality OLED display
The OLED display is large and bright. Long press the button to adjust the brightness of the screen. This OLED display can be seen easily and clearly in any environment from dark to strong sunlight.
5. Easy to drive
Users need to place their tip of a finger in a photoelectric sensor to diagnose, and a display screen will be shown in about 10 seconds without the need for SOO2 (oxygen saturation level), pulse rate, and heart rate waveform.
How to ensure the accuracy of your measurement?
1. very fast movement will affect the accuracy; Try to be calm while waiting for your reading.
2. The 2 mA measurement results are optimal when oxygen saturated and the heart are at the same level.
3. Avoid nail polish or long nails on the finger used for reading. The fingers should not get wet at all.
4. suitable ring finger, median and index finger are recommended as appropriate monitor location.
How to install battery
Even if both springs are on the same side, both batteries must be installed in opposite directions. The figure shows the correct battery placement. And the battery is not included in the package.
How to get your SPO2 and heart rate results?
- Remove the back cover and install two AAA batteries (Note: included in the box)
- Align your finger with the red light and wait for the oximeter to turn on.
- Read the result in 8 to 10 seconds.
Technical Details
 |
| Image Source - Google / Image by amazon |
Comments
Post a Comment
please do not enter any spam link in the comment box